Materials

• 15-0200 Armour Etch Glass Etching Cream
• 21-1643 Over N Over Stencil-WESTERN ALPHABET
• 21-1674 Over N Over Stencil-WHAT'S COOKING
• 25-4000 Pinstripe Border
• 8 x 10 inch frame
• Black Paper
• White Square Paper with Printed Menu

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design was etched in stages.The technique allows the use of a particular stencil image multiple times on the same project when you don't have enough to etch all simultaneously. Additionally, it enables stencil images to be placed in closer proximity than the stencil borders would otherwise permit.
2. After preparing the glass, draw a centerline down the back. See the centerline tutorial if necessary. Cover 1/2 to 1 inch on either side of the glass and 1/4 inch across the top and bottom securely with masking tape. Lay parallel pieces of border tape across the top and bottom of the glass. You will be etching between the lines so space accordingly.
3. Center the letters for Menu on either side of the centerline bellow the stripes on top. Add a baler on either end of the word Menu. Position the rolling pin centered bellow the word Menu . Center the pie along the centerline above the bottom stripes. Follow the etching cream instructions to add all of these elements to the glass.
4. Looking through the back of the glass, place other kitchen element stencils from the sheet on either side of the pie as close to it as possible. Repeat the process of adding and etching kitchen elements in close proximity to either side until the design is complete.
5. Center the menu on the back of the glass in the open design area. Place the black paper over the menu and glass as a solid background before attaching the frame backing.