Materials

• 15-0200 Armour Etch Glass Etching Cream
• 21-1645 Over N Over Stencil-MR. & MRS.
• 60-7035 Champagne Flutes

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design was etched in stages.The technique allows the use of a particular stencil image multiple times on the same project when you don't have enough to etch all simultaneously and it enables stencil images to be placed in closer proximity than the stencil borders would otherwise permit.
2. After preparing the glass, place the Mr. and Mrs. an inch bellow the brim of the flutes. Place the double frame centered directly bellow one of them and fill with the appropriate letters and numbers. Press them down firmly. See the lettering tutorial if necessary.
3. Follow the etching cream instructions to etch the completed glass first. Repeat the process with the double frame stencil and the letters and numbers to complete the second glass.