Materials

• #15-0200 Armour Etch Glass Etching Cream
• #21-1685 Over N Over stencil-SEA CREATURES
• #21-1635 Over N Over stencil-REVERSE LETTERS
• #21-1636 Over N Over stencil-REVERSE NUMBERS
• #60-3863 Mason Jar Mug

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design was etched in stages.The technique allows the use of a particular stencil image multiple times on the same project when you don't have enough to etch all simultaneously and it enables stencil images to be placed in closer proximity than the stencil borders would otherwise permit.
2. This design also used a masking technique which allows for the selective use of certain parts of a stencil in specific locations.
3. After preparing the glass, place the shark stencil slightly left of center in the design area on the mug. Follow the etching cream directions and etch the shark onto the glass.
4. Looking through the back of the glass, place the sawtooth circle frame next to the shark with the tail protruding into the circle. Place the desired letter into the circle where it does not touch the shark tail and press down firmly.
5. Cover the shark tail that protrudes into the circle and a little bit around it with masking tape. Press the tape down securely and use the etching cream as before to etch the monogram onto the jar.