Materials

• 15-0200 Armour Etch Glass Etching Cream
• 21-1699 Over N Over Stencil- UGLY SWEATERS
• 21-1659 Over N Over Stencil- HOLIDAY BAUBLES
• Round Glass Trophy
• White Glitter or Sparkles
• Photo

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design was etched in stages. The technique allows the use of a particular stencil image multiple times on the same project when you don't have enough to etch all simultaneously. Additionally, it enables stencil images to be placed in closer proximity than the stencil borders would otherwise permit.
2. Using a scissor or hobby knife, cut around the head of the person and set aside. After preparing the glass, position the head near the top of the glass and trace around it with a china pencil.
3. Place the sweater form centered under the head outline. Place the desired design elements into the sweater form and press down firmly. Follow the etching cream instructions to etch the sweater onto the glass.
4. Position the snowflakes around the sweater and outline of the head. Use the etching cream, as before, to etch the snowflakes onto the glass.
5. For this project, the etched side is the back of the circle. This will make the design appear to be in the snow globe. On the base under the unetched side of the glass, place the letters for the desired name. Begin with those in the middle of the nameand work outwards. Press them down firmly. See the lettering tutorial if necessary. The flat part of the base where the letters are will get the etching cream.
6. Use a piece of clear tape from the top of the globe to position the head over the sweater on the etched side of the glass. With a cotton swab, rub the edges of the head with clear drying, photo safe glue and then press it onto the glass.
7. On the etched side of the glass, use a cotton swab to rub glue under the sweater in the shape of a snow drift. Pour the glitter onto the glue and gently press down to secure it into the glue.