Materials

• 15-0200 Armour Etch Glass Etching Cream
• 29-2538 Flat Clear Balls
• 21-1658 Over N Over Stencil- UNDER THE SEA
• 21-1607 Over N Over Stencil- UPPERCASE ALPHABET
• Sea Green and Blue Sparkle Nail Polish

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design was etched in stages. The technique allows the use of a particular stencil image multiple times on the same project when you don't have enough to etch all simultaneously. Additionally, it enables stencil images to be placed in closer proximity than the stencil borders would otherwise permit.
2. Remove the top from the ornament and set aside. After preparing the outside of the glass, position the mermaid along the right side of the ornament. Follow the etching cream instructions to etch the mermaid onto the ornament.
3. Wipe down the design area with glass cleaner. Position the desired letters on a curve from tail to head. See the lettering tutorial if necessary. Use the etching cream, as before, to etch the name onto the ornament.
4. Wipe down the ornament with glass cleaner. Paint the sparkle polish on the back side of the ornament. Set aside until completely dry. Put the top back onto the ornament.